2025 Toro Z Master 7500 Series 96 in. (244 cm) (72098)
- Year 2025
- Make Toro
- Model Z Master 7500 Series
2025 Toro Z Master 7500 Series 96 in. (244 cm) (72098)
Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. The highly productive 96-inch deck design folds up neatly for easy transport, then folds down to handle your biggest jobs — in half the time of comparable mowers. It delivers all the speed and maneuverability of a zero-turn, along with the superior quality of cut you expect from Toro.
Features may include:
Superior Performance- Powered by a Tier 4-compliant, three-cylinder, 1.6 liter, 37 hp Yanmar diesel engine, this mower is packed with power to tackle the toughest mowing jobs.
- The floor pan and deluxe suspension seat are iso-mounted to reduce vibration. That results in a better operator experience and more productivity.
- Save on maintenance with extended service intervals and a deck design that uses up to four matching blades. The mower is also backed by a 5-year, 2,000-hour warranty (first two years no-hour-limit).
- Wing decks on the 96" model flex up 20 degrees and down 15 degrees to follow the terrain, hugging the ground for the smoothest possible cut. Folds to 75" to fit in trailer.
- Choose the right operating mode for mowing conditions, saving fuel costs while maintaining top-level performance with our Horizon™ Technology.
Engine
							Air Filter
							Heavy-Duty Canister Air Cleaner Air Filtration System with Electronic Vacuum Sensor
						
						
							Engine Power
							37 hp
						
						
							Engine Manufacturer
							Yanmar®
						
						
							Displacement
							1642 cc
						
						
							Starter
							Electric
						
						Fuel System
							Fuel Type
							Diesel 
						
						Drivetrain
							Clutch
							Wet Disc
						
						
							Drive System
							17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump
						
						
							Steering
							Controls: 1-5/8" (4.1 cm) Diameter Grips; Adjustable, Dampened  
						
						Wheels & Tires
							Wheels
							Anti Scalp Wheels: 13 Standard
						
						
							Wheels, Caster Specifications
							15 in. x 6 in. - 6 in. (38.1 cm x 15.2 cm x 15.2 cm) Flat-Free Semi-Pneumatic
						
						
							Tires, Rear Specification
							Drive Tires	: 26 in. x 12 in. - 12 in. (66.0 cm x 30.5 cm x 30.5 cm)
						
						Operational
							Operating Speed
							Blade Tip Speed: 18,100 ft/min / 5,516 m/min | Forward Ground/Transport Speed: Up to 12.5 mph / 20.1 kph | Forward Mowing Speed: Up to 12.5 mph / 20.1 kph
						
						Dimensions
							Length
							Blades: 24.5 in
						
						
							Cutting Width
							96 in / 244 cm
						
						
							Height
							of Cut: 1.0 - 5.5 in. / 2.5 - 14.0 cm | ROPS Height (Folded) 51 in. (129.5 cm), ROPS Height (Upright) 71.8 in. (182.4 cm)
						
						Capacities
							Fuel Capacity
							12.5 gal. / 47.3 L / 50 Qt.
						
						Features
							Features
							Blades: 4 | CARB Compliant: CARB Compliant | Foot Operated Height of Cut: Hydraulic with Rocker Switch | Front Bumper: Bull-Nose | Hour Meter: Horizon™ Technology | Product Type: Zero Turn Mowers | Terrain Type: Rough Terrain
						
						
							Construction Material, Deck
							Deck Design: 7-Gauge TURBO FORCE® w/ Bull-Nose Bumper | Material: 7 Gauge Steel
						
						
							Chute Type
							Discharge Chute: Rear
						
						
							Seat Type
							Deluxe Suspension Seat
						
						
							Spindle Type
							Bearings: Maintenance-free | Housing: 9 in / 22.9 cm Diameter Cast Aluminum
						
					 
			