2025 Toro Z Master 7500 Series 72 in. (183 cm) (72076)
- Year 2025
- Make Toro
- Model Z Master 7500 Series
2025 Toro Z Master 7500 Series 72 in. (183 cm) (72076)
Looking for a workhorse mower that’s easy to operate and gets the job done faster? Check out the Toro® Z Master® 7500-D. Maximum productivity with a side discharge 72 in. commercial cutting deck. It delivers all the speed and maneuverability of a zero-turn, along with the superior quality of cut you expect from Toro.
Features may include:
Superior Performance- Powered by a Tier 4-compliant, three-cylinder, 1.6 liter, 37 hp Yanmar diesel engine, this mower is packed with power to tackle the toughest mowing jobs.
- The floor pan and deluxe suspension seat are iso-mounted to reduce vibration. That results in a better operator experience and more productivity.
- Save on maintenance with extended service intervals and a deck design that uses up to four matching blades. The mower is also backed by a 5-year, 2,000-hour warranty (first two years no-hour-limit).
- Choose the right operating mode for mowing conditions, saving fuel costs while maintaining top-level performance with our Horizon™ Technology.
- Cools quickly for enhanced durability and performance.
Engine
							Air Filter
							Heavy-Duty Canister Air Cleaner Air Filtration System with Electronic Vacuum Sensor
						
						
							Engine Power
							37 hp
						
						
							Engine Manufacturer
							Yanmar®
						
						
							Displacement
							1642 cc
						
						
							Starter
							Electric
						
						Fuel System
							Fuel Type
							Diesel
						
						Drivetrain
							Clutch
							Wet Disc
						
						
							Drive System
							17.84 cu in Hydro-Gear HGM-H Motors with 18 cc Kanzaki® Pump
						
						
							Steering
							Controls: 1-5/8" (4.1 cm) Diameter Grips; Adjustable, Dampened  
						
						Wheels & Tires
							Wheels
							Anti Scalp Wheels: 6 Standard
						
						
							Wheels, Caster Specifications
							15 in. x 6 in. - 6 in. (38.1 cm x 15.2 cm x 15.2 cm) Flat-Free Semi-Pneumatic
						
						
							Tires, Rear Specification
							Drive Tires	: 26 in. x 12 in. - 12 in. (66 cm x 30.5 cm x 30.5 cm)
						
						Operational
							Operating Speed
							Blade Tip Speed: 18,500 ft/min / 5,638 m/min | Forward Ground/Transport Speed: Up to 12.5 mph / 20.1 kph
						
						Dimensions
							Length
							Blades: 24.5 in
						
						
							Dimensions
							Box: 99.6 in. x 73.6 in. x 72 in. / 253.0 cm x 187.0 cm x 182.9 cm
						
						
							Cutting Width
							72 in / 183 cm
						
						
							Height
							of Cut: 1.0 - 5.5 in. / 2.5 - 14.0 cm
						
						Capacities
							Fuel Capacity
							12.5 gal. / 45.5 L / 50 Qt.
						
						Features
							Features
							Blades: 3 | CARB Compliant: CARB Compliant | Foot Operated Height of Cut: Hydraulic with Rocker Switch | Front Bumper: Reinforced Bull-Nose | Hour Meter: Horizon™ Technology | Product Type: Zero Turn Mowers | Product Use: Commercial | Terrain Type: Rough Terrain
						
						
							Construction Material, Deck
							Deck Design: 7-Gauge TURBO FORCE® w/ Bull-Nose Bumper | Material: 7 Gauge Steel
						
						
							Chute Type
							Discharge Chute: Rubber
						
						
							Seat Type
							Deluxe Suspension Seat
						
						
							Spindle Type
							Bearings: Maintenance-free | Housing: 9 in / 22.9 cm Diameter Cast Aluminum
						
					 
			